top of page

Hormann SPU 42

Industrial Sectional Doors

Hormann

Hormann SPU F42 and SPU 67 Thermo Double-skinned steel sectional doors


PU-foamed sectional doors are available either with 42 mm depth or with sections with thermal break and 67 mm depth. For both versions, the door appearance is 100 % matching. 


Depth 42 mm 

Hormann sectional doors with 42-mm-thick PU-foamed sections are especially robust, offering good thermal insulation. 


67 mm depth with the best thermal insulation 

With the SPU 67 Thermo’s 67 mm sections with thermal break, you benefit from an excellent thermal value of up to 0.51 W/(m²·K)*. The thermal break between the exterior and interior of the steel sections also reduces the formation of condensation water on the inside of the door. 


The surface finish of the sections of steel doors or doors with bottom sections is based on hotgalvanized sheet steel and a high-adhesion primercoating (2-component PUR) that protect the door against adverse effects of the weather. 


Resistant Stucco surface 

Additionally, Stucco texturing gives the door surface a uniform structure on which light scratches or traces of dirt are more difficult to see. 


Micrograin surface finishes give an elegant look 

Micrograin features a smooth surface and characteristic fine lines. This door surface finish harmonises especially well with modern facades that are characterised by their clear formal structure. The inside of the door is Stucco-textured in Grey white, RAL 9002, as standard.


Standard profile, depth 42 mm 

As standard, the glazing frames are produced using high-quality aluminium extrusion profiles that are designed for robust industrial and commercial day-to-day work. The standard profile without thermal break is ideal for buildings that are barely or not at all heated or cooled.


Thermo profile with thermal break, depths 42 mm and 67 mm 

Anywhere the thermal insulation of buildings is important, the Thermo profiles with thermal breaks on the interior and exterior are the first choice. The 67-mm Thermo profile with 3 chamber system is delivered with triple glazing as standard. The 42 mm Thermo profile is offered with double glazing as standard. Other glass variants, e.g. climatic glass or synthetic quadruple pane, can further increase the energy efficiency.


If you'd like to find out more about the Hormann SPU F42 and SPU 67 Thermo Double-skinned steel sectional doors or have any queries at all, don't hesitate to get in touch.

​​It can be a big decision, choosing the garage or entrance door for your home. ​There are lots of options and it can sometimes become overwhelming.


​A home survey is recommended to choose the best option for you. It gives us a chance to take accurate measurements whilst discussing your priorities, design choices, budgets and pros and cons of each option.​

​

bottom of page